Fermit ISO 9001
Welcome!
Safe wherever you are!
Cart content: 0 items

 

1 / 1

SEALING MATERIALS MARSIT and NOVAFER

The sealing materials manufactured by Fermit SA are named MARSIT and NOVAFER and are used for automotive sealing gaskets production and for industrial use. The company is agreed supplier for the gas industry, having a Technical Agreement to deliver to the gas distribution and exploitation companies.

The two categories of sealing materials manufactured by Fermit are:

  • Non asbestos sealing materials for sealing gaskets, branded "MARSIT" which have resistance of temperature, high pressure and different work fields (acids, salts, bases, gas, etc)
  • Complex material sandwich type,"NOVAFER" is a sealing material with metallic core obtained through compression of a soft paper on both sides of a perforated steel plate, especially made for cylinder head gaskets and intake and exhaust manifold.
TYPE Description Typical application Operating condition Thickness

MARSIT

FA-A2

Asbestos free sealing material consists of aramid fibers, mineral fillers bound with nitril and natural rubber; fine chemical , mechanical and technical properties.

In chemical industry , to seal pipes against steam, water, air, mineral oils, fuels and other hydrocarbons leakages .


Automotive seals, industrial dies and machines

Maximum temperature:

400 °C short time

300 °C continuous

Max. pressure: 100 bar

Restriction concerning climatic province for using friction materials is not mentioned

(Environmental temperature -45 ° C/+45 ° C)

0,5 ÷ 6 mm;

Thickness tolerances :

Up to 1 mm: ± 0,1mm

Above 1 mm: ± 10% mm.

MARSIT

FA-G

Asbestos free sealing material consists of aramid fibers, glass fibers and mineral fillers bound with nitril and natural rubber

Seals for different application in chemistry and petroleum chemistry, acids and alkaline medium, water and oil.

Maximum temperature:

400 °C short time

350 °C continuous

Max. pressure: 90 bar

0,5 ÷ 6 mm;

Thickness tolerances :

Up to 1 mm: ± 0,1mm

Above 1 mm: ± 10% mm.

MARSIT

FA-N

Asbestos free sealing material consists of cellulose and mineral fillers bound with nitril and natural rubber

Seals for fields of application operating at reduced pressure and temperature.

Maximum temperature:

200 °C short time

150 °C continuous

Max. pressure: 40 bar

0,5 ÷ 6 mm;

Thickness tolerances :

Up to 1 mm: ± 0,1mm

Above 1 mm: ± 10% mm.

MARSIT

FA-S

Asbestos free sealing material consists of synthetic fibers, cellulose and mineral fillers bound with nitril and natural rubber

Seals for small clamping forces range ,good water , gases ,oil resistance.

Maximum temperature:

200 °C short time

150 °C continuous

Max. pressure: 60 bar

0,5 ÷ 6 mm;

Thickness tolerances :

Up to 1 mm: ± 0,1mm

Above 1 mm: ± 10% mm.

Reinforced

MARSIT

FA-A2

Reinforced (wire mesh core ) asbestos free sealing material consists of aramid fibers and mineral fillers bound with nitril and natural rubber.

Automotive Industry, Petroleum chemistry, shipyards.

Maximum temperature:

400 °C short time

300 °C continuous

Max. pressure: 120 bar

1,0 ÷ 5 mm;

Thickness tolerances :

Up to 1 mm: ± 0,1mm

Above 1 mm: ± 10% mm.

MARSIT materials are delivered as follows:

- Standard sheet 1500mm X 1.500mm ± 5%;

- Special dimensions 1500mm X 3000mm excepting the reinforced sealing material.

At requirement the sheets could be delivered graphitized on both sides.

For references please search in our online catalogue or contact us for more details

Online Catalogue

Please visit our virtual showroom!







OUR VALUES:

  • Commitment to quality

  • Safety guarantee

  • Continuous improvement

  • Exceeding customer expectations

  • Respect for the environment

  • Human respect

We are searching for suppliers of: